内弹道挤进过程模型建立及数值分析研究
Title Interior Ballistic Model Establishment and Numerical Analysis of the Engraving Process
Abstract
The engraving process of projectile is a high impact, large deformation,
with interference fit contact problem.In view of this complex problem
the following work was done. a)In order to understand the interior
ballistic engraving process .The physical model of engraving process of
projectile was simplified. b) Engraving process with plastic band
material model was studied, and the contact stress expression was
got ,which provides interior ballistic numerical simulation with a
theoretical basis, programming calculated engraving resistance
numerical solutions, and the factors that influence interior ballistic
engraving process was studied. c) Weakening the band material
hypothesis, engraving process of projectile with elastic-plastic
hardening elastic material band has been studied. Combined with the solid
mechanics theory, using the finite element method,the interior ballistic
engraving process was numerically simulated, and the effect of the
mechanical parameters of material properties on the engraving process
was studied.
Keywords Engraving Process Interior Ballistic Contact
Nonlinear Finite Element Method Numerical Simulation
目 录
1 引言 1
1.1 选题背景和意义. 1
1.2 国外研究现状. 3
1.3 国内研究现状. 5
1.4 本论文的主要工作. 6
2 基本理论概述及推导 7
2.1 计及挤进过程的内弹道方程组. 7
2.1.1 内弹道方程组的推导 7
2.1.2 内弹道方程组 13
2.1.3 内弹道方程组的数值解法 15
2.2 连续介质力学基本方程. 15
2.2.1 运动方程 15
2.2.2 动量方程 16
2.2.3 质量守恒方程 16
2.2.4 能量守恒方程 17
2.2.5 边界条件 17
2.3 非线性固体力学理论. 17
2.3.1 弹塑性本构关系 17
2.3.2 非线性几何方程 26
2.4 达朗贝尔原理. 31
3 刚塑性弹带模型下的内弹道挤进过程分析 33
3.1 刚塑性弹带挤进过程数学物理模型. 33