et al., 1985; Higbie, 1935) may suggest that a surface  renewal

Sh = a Sc˛ × Reˇ (4)

The present experimental data will be used to obtain the values of a and ˇ  in  the  above  dimensionless  mass trans- fer equation. Following previous theoretical and experimental

mechanism contributes in enhaning the rate of mass transfer at the rotating cylindrical blade. During rotation, each blade contacts a fresh solution for a time tc  given by

db

mass transfer studies, Sc exponent ˛ was fixed at the value

0.33 (Walsh, 1993; Incropera and De Witt, 1980). Fig. 5  shows

tc  = V

(7)

the effect of impeller rotation speed on the mass transfer coef- ficient, the data fit the following equation:

K = a N0.42 (5)

(where v = ωr, ω = 2wN/60).

During this contact time unsteady state diffusion takes place between the fresh solution and the impeller blade according to the following equation:

The increase in K with impeller speed is attributed to the decrease in the average developing diffusion layer thickness on each rotating blade as a result of the decrease in the   over-

lying developing hydrodynamic boundary layer thickness. It is also possible that recycled flow induced by impeller rota- tion in the cylindrical container contribute to enhancing the rate of mass transfer at the rotating impeller. Moo-Young et al. (1972) who studied the effect of impeller geometry on the mix- ing efficiency of agitated vessels found that an impeller with a single cylindrical blade induces radial flow pattern, this was confirmed in the present work by using polystyrene particles as a tracer (Fig. 6).

Fig. 7 shows the effect of blade length (impeller diameter) on the mass transfer coefficient, the data show that the mass transfer coefficient increases with increasing blade length probably because of the increase in the average linear velocity

(V) with increasing the distance from the center of the impeller (r) [V = ωr, ω = 2wN/60].

An overall mass transfer correlation was envisaged in terms of the dimensionless groups Sh, Sc and Re, Fig. 8 shows that the present data for the conditions 1735 < Sc < 4032, 6300 < Re < 3200 fit Eq. (6) with an average deviation of ±13.8%.

Sh = 0.429    Sc0.33    Re0.42 (6)

The N exponent 0.42 in Eq. (5) which is a fair agreement with the value 0.5 predicted by the surface renewal theory (McCabe

With the boundary conditions

C = Ci     for    y = 0    at    t > 0

C = Cb     for   y → ∞   at   t > 0

C = Cb     for    y = 0    at    t = 0

-1.7

-1.9

-2.1

-2.3

-2.5

-2.7

-2.9

1.7 1.8 1.9 2 2.1 2.2 2.3 2.4 2.5 2.6 2.7

Log N (rpm)

Fig. 7 – Effect of cylinder blade length on the mass transfer coefficient.

Fig. 8 – Overall mass transfer correlation for single impeller.

Integration of the above equation leads eventually to the following equation (McCabe et al., 1985; Higbie, 1935):

.  D  .0.5

上一篇:单螺带桨叶与双螺带桨叶的在搅拌器英文文献和中文翻译
下一篇:超声雾化器英文文献和中文翻译

双位错叶片涡轮桨搅拌釜英文文献和中文翻译

单螺带桨叶与双螺带桨叶...

固液搅拌罐的CFD模拟英文文献和中文翻译

固定床反应器中催化剂孔...

搅拌和搅拌反应釜英文文献和中文翻译

磁力搅拌器英文文献和中文翻译

高压釜设计英文文献和中文翻译

AES算法GPU协处理下分组加...

压疮高危人群的标准化中...

上海居民的社会参与研究

浅论职工思想政治工作茬...

基于Joomla平台的计算机学院网站设计与开发

浅谈高校行政管理人员的...

STC89C52单片机NRF24L01的无线病房呼叫系统设计

酵母菌发酵生产天然香料...

提高教育质量,构建大學生...

从政策角度谈黑龙江對俄...