摘要本文以大口径弹头为研究对象,根据大口径步枪弹头的研究现状,为优化弹头外形设计,用Fluent Gambit建立弹头外流场数值仿真模型并生成网格,通过Fluent获取相关的气动力参数,对不同参数变化下的弹头进行气动特性分析,具体工作如下:
首先,以现有的比较成熟的大口径弹头外形为基准,对其弧形部半径、弧形部长度、船尾角度和船尾长度四个参数做适当变化,一个参数改变三次,在CATIA中将弹头模型建成整体模型。为后续部分工作提供支持;29462
其次,在Gambit中进行网格划分设置,生成非结构网格,网格生成后设置边界条件。通过Fluent的流体仿真,得到不同气动外形弹头的流场特性阻力系数,着重分析其压力云图和阻力系数的变化规律和特点;
    最后,对比分析不同气动外形的弹头的气动特性。
关键词 大口径弹头 气动力系数 流场特性 数值模拟 气动特性分析
毕业论文设计说明书外文摘要
Title    Large-caliber bullet shape design and aerodynamic characteristics analysis                                    
Abstract
In the paper, with large-caliber bullet as the research object, and according to research status of large-caliber bullet,in order to optimize the design of the structure of the projectile, Numerical simulation of projectile outflow established model and generate grid using Fluent Gambit. Access to relevant aerodynamic parameters with Fluent. Different parameters of the projectile under the aerodynamic characteristics were analyzed, the main works are as follows:
First, existing mature large-caliber projectile shape as a benchmark, make the appropriate changes in the radius of the arc portion of its arc degrees minister, stern angle, aft length of the four parameters, a parameter is changed three times.the model will be built in the overall model projectile by CATIA.  provide support for the subsequent part of the work.
Secondly, meshing settings by Gambit, generate unstructured network, and Setting the boundary conditions after mesh generation.through Fluent fluid simulation, Get a different aerodynamic shape of the flow field characteristics of warheads and drag coefficients,It analyzes the variation of the pressure cloud and drag coefficients and characteristics.
Finally, comparative analysis of the aerodynamic characteristics of the different aerodynamic shape of the projectile.
Keywords large caliber projectiles;aerodynamic coefficients; flow characteristics; numerical simulation;  aerodynamic characteristics
目   次
1 绪论    3
   1.1 课题研究背景及意义    3
   1.2 国内外研究概况    4
   1.3 本文工作    5
2 不同参量弹头的CATIA建模    6
   2.1 弹头外形方案的确定    6
   2.2 不同气动外形弹头参量改变    7
   2.3 本章小结    12
3 Gambit网格划分    13
   3.1 Gambit简介    13
   3.2 网格划分     13
   3.3 本章小结    14
4 Fluent求解器相关设置及数值方法    15
   4.1 计算流体力学    15
   4.2 数值理论方法    16
   4.3 弹头绕流场的数值模拟边界条件    20
   4.4 Fluent求解器相关设置    20
   4.5 本章小结    22
上一篇:某变初速发射装置设计与分析
下一篇:家用空气净化设备的发展趋势研究

FLUENT通风机的振动噪声分析与控制

Fluent省煤器换热管内流固耦合模拟

FLUENT的LNG发动机用空浴式LNG气化装置研究

FLUENT火箭弹发动机超声速...

Fluent柴油机DPF性能研究+源程序

Fluent凹头弹空中飞行气动特性分析

Fluent止停汽车碰撞牵引车...

上海居民的社会参与研究

AES算法GPU协处理下分组加...

酵母菌发酵生产天然香料...

浅谈高校行政管理人员的...

提高教育质量,构建大學生...

浅论职工思想政治工作茬...

STC89C52单片机NRF24L01的无线病房呼叫系统设计

从政策角度谈黑龙江對俄...

压疮高危人群的标准化中...

基于Joomla平台的计算机学院网站设计与开发