摘要:本次设计的内容是乙烯塔的设计,采用的是Ф1200的浮阀塔,设计压力为3.6MPa;塔内的操作介质为:CH4、C2H6、C2H4、C3H8、C5H8;设计方法采用压力容器的常规设计方法,按照GB150-98《钢制压力容器》等技术法规执行,设计内容主要包括总体方案确定,材料选择,结构设计,零部件设计选用,强度和稳定性校核。塔设备是化工及石油化工生产中最重要的单元设备之一。塔设备是通过其内部的机构使气(汽)液两相或液液之间充分接触,进行质量传递和热量传递。通过塔设备完成的单元操作有精馏、吸收、解吸、萃取和洗涤。浮阀塔具有操作弹性大,效率高,处理能力好,雾沫夹带小,易于调整,以及结构简单安装简便等优点。在现代化工塔器中应用广泛。关键字:乙烯塔的设计;浮阀塔;导向浮阀7679
Design of Ethylene Tower
Abstract: The content of this design is the design of ethylene tower. Uses a Ф 1200 float valve tower. The design pressure is 3.6MPa. The tower for the operating medium is CH4、C2H6、C2H4、C3H8、C5H8.Design method using the conventional design method of pressure vessel.According to GB150-98《Steel pressure vessel》technical enforcement.Design content mainly includes the overall scheme, material selection, structure design, parts design, strength and stability checking. Tower equipment is an very important operation unit in chemical industry and petroleum industry.  Tower equipment is for mass transfer and thermal transfer by making gas and liquid amply contact each other. Such as the operation of rectification, absorbing, extraction and washing can be completed by tower equipment. Float valve tower with large elasticity of operation, high efficiency, good processing ability, entrainment with small, easy to adjust, and simple structure the advantages of easy installation. Widely used in modern chemical tower.
KeyWords:Design of ethylene tower;Float valve tower;Guide float valve
 目  录
1 绪论    1
1.1 课题介绍    1
1.1.1 浮阀塔的研究意义    1
1.1.2 浮阀塔的工作原理    2
1.1.3 新型塔板技术及工业应用    2
1.2 设计基本要求    2
1.3 总体方案确定    3
2 塔设备的材料的选择与结构设计    3
2.1 塔体材料的选择    4
2.2 裙座材料的选择    4
2.3 塔体的结构设计及计算    4
2.3.1 设计条件    4
2.3.2 塔体厚度计算    4
2.3.3 封头厚度计算    5
3 塔设备的质量载荷与自振周期计算    6
3.1 塔设备的质量载荷计算    6
3.2 塔的自振周期计算    8
4 地震与风载荷弯矩计算    10
4.1 地震与地震弯矩计算    10
4.1.1 水平地震力    10
4.1.2 垂直地震力    12
4.1.3 地震弯矩    14
4.2 风载荷和风弯矩计算    15
4.2.1 水平风力    15
4.2.2 风弯矩    16
4.3 偏心弯矩    18
4.4 塔体的强度和稳定性校核    18
5 零部件的设计选用    20
5.1 总体结构    20
5.1.1 塔盘    20
5.1.2 降液管    21
5.1.3 溢流堰    21
5.2 设备接管    22
5.2.1 进料管    22
5.2.2 出料管    22
5.2.3 进气管    22
5.3 塔顶吊柱的选择与设计    23
6 法兰与接管的确定及开孔补强的计算    25
上一篇:长链安全氯甲醚的制备及其应用于胺基树脂的合成研究
下一篇:年产4万吨氯乙酸生产工艺设计

浅析传统元素在移动端APP界面设计中的应用

食用香精中定香剂的筛选与设计

钴基纳米阵列电极设计及表征

某市二十万吨污水处理厂的工程设计+CAD图纸

江阴市小城镇生活污水处理厂的设计+CAD图纸

超声辅助均匀设计法应用...

D-D-π-A型有机染料光敏剂的分子设计

浅谈新形势下妇产科护理...

浅谈传统人文精神茬大學...

多元化刑事简易程序构建探讨【9365字】

国内外无刷直流电动机研究现状

高校网球场馆运营管理初探【1805字】

《醉青春》导演作品阐述

中国古代秘书擅权的发展和恶变

拉力采集上位机软件开发任务书

谷度酒庄消费者回访调查问卷表

辩护律师的作证义务和保...