磷酸铁锂材料具有良好的热稳定性能和循环性能,低污染和价格低廉等优点,因此受到人们的广泛关注。在锂离子电池的应用上, 此材料被认为是具有很大潜力的锂电池正极材料之一。然而,较低的锂离子扩散系数和电子电导率影响了磷酸铁锂材料大倍率性能。所以需要改变其晶体结构、形貌和尺寸来提升LiFePO4的性能,这些改性方法可以从制备条件和方法来控制。本文主要通过水热合成法配以表面活性剂十吹冰烷基三甲基溴化铵(CTAB)和酚醛树脂凝胶(R-F)来辅助合成LiFePO4/C材料,通过X射线衍射(XRD)等表征手段和循环伏安法测试电化学性能来确定其表面活性剂辅助合成的作用,CTAB可以控制LiFePO4的颗粒大小,使其分布均匀。41389
毕业论文关键词: LiFePO4;锂电池正极;十吹冰烷基三甲基溴化铵;水热合成法
Research of the Preparation and electrochemical performance of LiFePO4/C materials
Abstruct:Lithium iron phosphate material with good thermal stability performance and cycle performance, low pollution and low price is attracting widespread attention. In the application of lithium ion battery, this material is considered as one of the great potential lithium battery cathode material. However, its power performance is greatly limited by slow diffusion of lithium ions across the two-phase boundary and its low electronic conductivity. Changing the crystal structure, morphology and size to enhance the performance of LiFePO4, these properties can be regulated by different synthetic conditions and methods. The sample in this paper mainly synthesized by hydrothermal synthesis method with surface active agent cetyltrimethylammonium bromide (CTAB) and resorcinol-formaldehyde (R-F) sol-gel polymerization. According to the result of the X-ray diffraction (XRD) or scanning electron microscopy (SEM) characterization methods of materials and cyclic voltammetry electrochemical performance test to confirm the role of surfactant and other factors.
Keywords: LiFePO4;lithium ion battery;cetyltrimethylammonium bromide ;hydrothermal synthesis
 目  录
1  课题背景    1
文献综述    1
2.1  锂离子电池工作原理    1
2.2  锂离子电池负极材料的概述    2
2.3  锂离子电池正极材料的概述    2
2.3.1  钴酸锂    3
2.3.2  镍酸锂    3
2.3.3  锰酸锂    4
2.3.4  磷酸铁锂    4
2.4  LiFePO4的电化学作用机理    5
2.5  磷酸铁锂正极材料的制备方法    5
2.5.1  固相反应法    5
2.5.2  溶胶—凝胶法    5
2.5.3  微波法    5
2.5.4  喷雾热分解法    6
2.5.6  水/溶剂热合成法    6
2.6  LiFePO4材料的改性    6
2.6.1  掺杂    6
2.6.2  表面改性    7
2.6.3  颗粒纳米化    7
研究目的及内容    7
4  实验方案与仪器    8
4.1  原料及药品    8
4.2  仪器与设备    9
4.3  正极材料制备    9
4.3.1  碳壳制备    9
4.3.2  前驱液制备    9
4.4  水热反应    10
4.5  粉末烧结    10
5  材料定性及电化学性能测试    11
5.1  X射线衍射分析    11
5.2  电化学性能    11
5.2.1  测试操作    11
上一篇:石墨烯/多孔氧化铝的质子传导性能研究
下一篇:聚丙烯酸型阴离子交换树脂的新制备方法

常温常压下磷酸钙的化学沉积研究

三维磷酸锰(II)配位聚合物水热合成与表征

无机磷酸盐对厌氧氨氧化...

天然沸石对水中磷酸根离子吸附研究

非水溶剂体系中无机微孔...

稀土磷酸盐/C复合材料的合成及发光性能研究

钴膜修饰碳纤维电极测定磷酸二氢盐的研究

《醉青春》导演作品阐述

辩护律师的作证义务和保...

浅谈传统人文精神茬大學...

浅谈新形势下妇产科护理...

谷度酒庄消费者回访调查问卷表

中国古代秘书擅权的发展和恶变

拉力采集上位机软件开发任务书

多元化刑事简易程序构建探讨【9365字】

高校网球场馆运营管理初探【1805字】

国内外无刷直流电动机研究现状