摘要为满足现代高性能电化学传感器的需求,通过简单、绿色的软化学方法,将N掺杂氧化石墨烯和聚吡咯两类功能材料通过原位聚合的方法进行复合,制备电化学性能优异、稳定性好、循环寿命长、比表层积大的修饰电极材料,并应用于百草枯等农药的电化学传感研究。利用控制氧化石墨烯的还原程度调控表层基团的种类和数量,结合聚吡咯本身的结构特点来稳定氧化石墨烯分子。将N掺杂氧化石墨烯和聚吡咯有机复合可以克服石墨烯易堆积,以及聚吡咯材料电荷转移相对慢、多次使用后机械性能差的缺点,充分产生协同效应,发挥各自优势。21441
本实验利用N掺杂石墨烯/聚吡咯复合物对电极进行修饰,之后用此修饰电极对农药百草枯进行检测。
关键词  N掺杂氧化石墨烯  聚吡咯  百草枯  电化学检测
毕业论文设计说明书(论文)外文摘要
Title  Preparation of the conductive polymerfilm modified electrode and
       its application in the detection of pesticides                 
Abstract
To meet the needs of modern high-performance electrochemical sensors, through a simple,green soft chemical method, the N-doped graphene oxide and polypyrrole two types of functional composite materials by in situ polymerization method for preparing excellent electrochemical performance, stability good, long cycle life, high specific surface area of the modified electrode material and applied to study the electrochemical sensing paraquat and other pesticides.Controlling the reducing degree of regulation of the graphene oxide type and quantity of surface groups,binding characteristics to stabilize itself polypyrrole graphene oxide molecules.The N-doped graphene oxide and polypyrrole organic compound can be overcome easily stacked graphene,and polypyrrole relatively slow charge-transfer material,the use of poor mechanical properties after repeated shortcomings,give full play to their respective advantages and synergies.
In this study,the use of N-doped graphene/polypyrrole composite electrode was modified after using this modified electrode to detect pesticide paraquat.
Keywords  graphene  polypyrrole  paraquat  electrochemical-detection
 目   次
1 绪论    1
1.1 研究背景    1
1.2 石墨烯的制备    1
1.2.1 机械剥离法    2
1.2.2 氧化石墨-还原法    2
1.2.3 化学气相沉积法    2
1.2.4 电化学方法    2
1.2.5 电弧法    3
1.2.6 外延生长法    3
1.3 石墨烯的功能化    3
1.4 石墨烯在化学中的应用    4
1.4.1 修饰电极    4
1.4.2 化学电源    4
1.4.3 催化剂和药物载体    4
1.4.4 太阳能电池    5
1.5 百草枯介绍    5
1.5.1 百草枯的检测方法    5
1.5.1.1 分光光度法    5
1.5.1.2 气相色谱法    6
1.5.1.3 液相色谱法    6
2 实验部分    7
2.1 化学药品和试剂    7
2.2 设备    7
2.3 N掺杂氧化石墨烯的制备    7
2.4 N掺杂氧化石墨烯与聚吡咯的复合    7
2.5 NGE-PPY电极的制备    8
3 结果与讨论    9
3.1 相关物质的表征    9
3.1.1 相关物质红外图谱    9
3.1.2 相关物质EIS曲线    9
3.1.3 修饰材料表层微观形态    10
上一篇:超细石墨乳的制备+文献综述
下一篇:纺织品中残留N,N-二甲基甲酰胺与N,N-二甲基乙酰胺检测方法研究

丙烯酸接枝改性聚偏氟乙...

遮光性白色聚酰亚胺薄膜的制备与性能

苯胺四聚物用于锌-聚合物...

基于多氮配体Cd(II)离子及...

基于多氮配体Cd(II)离子及...

改性剂接枝率对PVDFPGS-g-...

石墨相氮化碳/PVDF复合超滤膜的制备

浅谈传统人文精神茬大學...

多元化刑事简易程序构建探讨【9365字】

中国古代秘书擅权的发展和恶变

国内外无刷直流电动机研究现状

辩护律师的作证义务和保...

《醉青春》导演作品阐述

高校网球场馆运营管理初探【1805字】

浅谈新形势下妇产科护理...

谷度酒庄消费者回访调查问卷表

拉力采集上位机软件开发任务书