Abstract As a key technology in the field of advanced manufacturing, an open architecture controller is studied。 In order to develop an open architecture software-CNC system on personal computer (PC) according to open modular architecture...

ABSTRACT In this experimental study, the influence of various surface treatments on a number of performance metrics of lubricated rolling-sliding contacts are investigated。 The surfaces considered are (i) hard ground surfaces at root-mean...

a b s t r a c t In this paper the dynamic behavior of a single stage spur gear reducer in transient regime is studied。 Dynamic response of the single stage spur gear reducer is investigated at different rotating velocities。 First, gear...

a b s t r a c t Currently, 3C products are required to be lightweight, portable, and convenient。 Injection molding is among the most used techniques for mass production in plastic processing industries; however, producing thinner parts th...

ABSTRACT: This paper describes work un-welding workcell。 This is a complex system derway to evaluate the effectiveness of voiceinvolxing= inputs from multiple sensors and recognition systems as an element in thecontrol of a wide variety o...

Abstract The laser welding process was introduced into dentistry by the end of the 1980s, resulting on a great impulse to that area with the development of cheaper and smaller equipment, using simpler technique。 This allowed greater use o...

Abstract Microinjection moulding of high-aspect-ratio microstructures is important for the fabrication of various microsystem components。 Successful microinjection moulding technologies may depend on accurate understanding of the cavity f...

Abstract: A method of multi-objective optimization is proposed to improve the quality of crushed materials and vibration performance of the rotor。 This method is driven by the first order natural frequency and the radius of the rotor。 T...

Abstract。 The Solid Works environment, through the methods of field surveying and mapping of a vertical shaft impact crusher for structural reverse and design,counter rotating subsystem of the spare parts for 3D geometric modeling。 Coun...

Abstract This paper presents a micro roller embossing process for patterning large-area substrates of laminated green ceramic tapes。 The aim of this research is to develop a large-area microstructure formation technique for green ceramic...